Skip to main content

  Toyota Hilux KUN25 (Vigo) Crew/Double Cab Pick-Up Multi Point Bolt-in Roll Cage Back to results

Make: Toyota

Model: Hilux KUN25 (Vigo) Crew/Double Cab Pick-Up 4-door (2005-2015)

Description:

Heavy Duty ROPS / Roll cage number T060. Multi-point bolt-in external / internal ROPS (Roll Over Protection).

  • ROPS offers protection for all passengers.
  • Mounts to body shell at 14 locations.
  • Clears normal trim and dashboard.
  • "X" bracing in B hoop.
  • Uses Safety Devices trademark flexible linkage system to minimise vehicle body fatigue.
  • Includes spare wheel mounting on rear hoop and additional brackets for spot lights and beacons
  • For standard vehicles without a sunroof.
  • Not suitable for vehicles with curtain airbags.

We strongly recommend fitting the roll cage padding kit when installing this roll cage.

Full options:

  •   RBT060 7SSS - Heavy Duty External/Internal bolt-in ROPS (full option only).
    Available as a full cage only.

Padding options:

  •   RBT060 PAD - T060 ROPS protective padding kit.
    Moulded polyurethane grey roll cage protective padding of 55 shore hardness for all internal components above shoulder height, 16mm thickness, 1000mm length. Not homologated.

Technical Specification:

  •  Finished internal roll cage provided with grey powdercoat paint finish unless specified otherwise. Other colours available: black, blue, silver, white and red. Roll cage can be provided unpainted by special request.
  •  Finished external roll cage provided with black powdercoat paint finish unless specified otherwise. Other colours available: grey, blue, silver, white and red. Roll cage can be provided unpainted by special request.
  •  Installation time: 1 experienced person = 15 hours (20 hours if less experienced).
  •  Tested by MIRA under the following testing parameters: Test 1 is 7.5 Gross Vehicle Weight (GVW) applied vertically, then Test 2 is 5.5GVW applied longitudinally fore and aft, Test 3 is 1.5GVW applied laterally, Test 4 is a combined vertical, longitudinal and lateral test, all at once. 3.0GVW applied vertically, 3.0GVW applied longitudinally fore and aft, and 1.5GVW applied laterally.

Independently Certified: Certified by MIRA / ROSC to Oil and Gas Industry Standards. Approved/certified to Australian Design Rules in the State of Queensland.

Download Fitting Instructions

Find a Dealer