Skip to main content

  Citroen C1 6 Point Bolt-in Roll Cage Back to results

Make: Citroen

Model: C1 3-door (2005-2014)

Description:

Roll cage number C052. 6 point bolt-in roll cage for unique single door bars or cross door bars. All parts 45mm. Front cage has windscreen reinforcement bar. 

Exclusive cage used for Citroen C1 Racing Club.

All cages for this championship to be purchased through C1 Racing Club only.

For non C1 Racing Club cages, use X011

Complies with Motorsport UK regulations as at January 2020 and Nationally Homologated when installation has been approved by Safety Devices.

Front options:

  •   RBC052 3SXU - Front roll cage with windscreen reinforcement bar for unique single door bars, with roof cross
    Must be used with a rear roll cage.
  •   RBC052 3SXX - Front roll cage with windscreen reinforcement bar, for cross door bars, with roof cross
    Must be used with a rear roll cage.

Rear options:

  •   RBC052 5XSU - Rear cage, single fixed diagonal for single door bars and roof cross with harness bar
    May be used without a front cage.
  •   RBC052 5SXX - Rear cage, cross diagonal, harness bar, lower backstays, for cross door bars and roof cross
    May be used without a front cage.

Door Bar options:

  •   RBC052 DSUN - Unique single door bar, near side (left hand side).
    Must be used with a front and rear roll cage.
  •   RBC052 DSUO - Unique single door bar, off side (right hand side).
    Must be used with a front and rear roll cage.
  •   RBC052 DXUN - Cross door bar, near side (left hand side).
    Must be used with a front and rear roll cage.
  •   RBC052 DXUO - Cross door bar, off side (right hand side).
    Must be used with a front and rear roll cage.

Other options:

  •   RBC052 SB - Rear strut brace/harness mount.
    Must be used with a rear roll cage. Separate component.

Padding options:

  •   RBPUFIA45B - Motorsport roll cage protective padding (FIA homologated).
    FIA homologated black roll cage padding, size specific to the external thickness of this cage's tubing, 600mm length.
  •   RBPUPADBLK16MM - Motorsport roll cage protective padding.
    Moulded polyurethane black padding, 16mm thickness, 1000mm length. Not homologated.
  •   RBPUPADBLK9MM - Motorsport roll cage protective padding.
    Moulded polyurethane black roll cage padding, 9mm thickness, 1000mm length. Not homologated.

Technical Specification:

  •  Finished roll cage provided with black powdercoat paint finish unless specified otherwise. Other colours available: grey, blue, silver, white and red. There is a surcharge for colours other than black.
  •  Roll cage can be provided unpainted by special request (no reduction in price).

Independently Certified: Complies with Motorsport UK regulations as at January 2020 and Nationally Homologated when installation has been approved by Safety Devices - UK/17/0121

Find a Dealer